This Sanbang daily protective facemask is KN95 certified, similar to the American N95 and European FFP2 certifications, meets the EN 149:2001 standard andis fully certificated and CE marked.
The KN95/FFP2 mask is a respiratory protection mask and can block over 95% of very small (0.3 micron level) test particles. It is not resistant to oil and can be used to protect nonoil suspended particles such as: air pollutants, pollen, animal allergens, bacteria and germs. Manufactured from 5 ply PP non-woven material and high quality electrostatic cotton to provide breathability and good filtration performance. This material is flexible and soft making it very comfortable to wear. (please note- wearing a mask cannot eliminate the risk of infection as it depends on the proper fit of the mask to the wearer and level of hygiene standards observed).
The KN95 is designed to maximize breathing comfort and exhalation using a cool flow system. The mask has three dimensional structure, a built in nose bridge and soft elastic straps to provide a snug fit to face leaving no gaps. Closer fit to face prevents harmful pollutants entering into the mask. No welding seam design on the chin to eliminate skin irritation and more comfortable wearing. The mask folds flat when not in use for hygienic storage. Use time limit When you use a mask, it gradually absorbs more and more particles, so the filter material becomes clogged over time. From the perspective of hygienic use, it is recommended that the disposable masks should be replaced at the end of a work shift (i.e. 8 hours).
The mask must be disposed of immediately:
- When the breathing resistance of the mask increases significantly
- When the mask is visibly soiled or damaged
- When the mask does not fit close against face and gaps appear allowing pollutants to enter inside mask
- When contaminated (e.g. when contaminated with foreign bodies such as blood stains or droplets.
- When contacting an infected patient or suspected patient, replace it immediately (as the mask has been contaminated);
Storage conditions: 1. Masks must be properly stored in its packaging and away from contaminated areas 2. It must be kept in a clean environment and away from mechanical extrusion, humidity, high temperature, sunlight, and contact with corrosive chemicals to prevent damage; 3. It is recommended that the product is stored at a temperature of -20 °C to + 30 °C and a relative humidity of 80% or less. 4. Care must be taken to avoid deformation of the mask when in storage
Caution Wash your hands before each wear and every time you remove your mask. Avoid touching the mask during wearing to reduce the risk of contamination. Ensure the mask is on your face right way up. The built in metal/sponge strip end is the top of the mask and this should sit comfortably on your nose. Do not expose your nose while wearing the mask. Tighten elastic strips if necessary to ensure no gap left between face and mask. To test after wearing the mask, exhale hard and make sure the air cannot escape out from the edge of the mask. KN95 mask is NOT washable. Washing will damage the structure of the electrostatic filter material, cause penetration and damage its filtering performance The mask SHOULD NOT be sterilised in a microwave oven and cannot be cleaned.
