Kingswood 5ft LED T5 Tube, 20W, 6000K daylight
A 5ft (1449mm) LED replacement for T5 fluorescent tubes, with its own internal driver. It gives 2100 lumens from 20W, starts instantly with no flicker or hum, and has no starter to fail.
Specification
- Length and diameter: 1449mm x 22mm, G5 bi-pin caps
- Power: 20W, input 100-277V, internal driver
- Light: 2100 lumens, 6000K daylight, 140 degree beam, CRI 80
- Epistar 2835 LED chips on an aluminium heat sink with an opal light-guide cover
- Rated life over 50,000 hours, operating -10C to +65C, non-dimmable, CE and RoHS
- Part number: T520LED/6000K/ID
Installation
This tube runs on mains power with the fitting's fluorescent ballast and starter taken out of circuit, so it is not a plug-in swap for a fitting left on its fluorescent gear. The conversion must be carried out by a qualified electrician and the fitting labelled as converted to LED. At 22mm across it is slightly wider than a 16mm glass T5, so check clearance in slim or louvred fittings before ordering.
End of line, limited stock.
