Specifications:
- Model: Redring MS25 (MS25BLU), code 500002500
- Capacity: 25 litres
- Element: 2.0kW
- Type: Unvented, mains pressure, stored hot water
- Thermostat: Front dial adjustable up to 65C, with thermal cut-out and LED indicator
- Tank: Glass lined with magnesium sacrificial anode, CFC-free polyurethane insulation
- IP rating: IPX4
- Connections: 1/2in BSP male inlet and outlet
- Electrical supply: Pre-wired 1m cable with fitted 13A plug
- Dimensions: 406mm high x 426mm wide x 320mm deep
- Weight: 12.1kg empty
- Supplied with: Dielectric connectors and wall mounting bracket
- Optional: Redring MSCWP cold water control pack, code 87783101, where inlet pressure control is required
- Guarantee: 1 year
- EAN: 5056462389905
When a sink sits too far from the boiler for a hot feed to make sense, the Redring MS25 keeps a tank of hot water ready right under it. The largest in the range at 25 litres, for a commercial kitchen sink, workshop, office washroom or holiday let. Because it stores more than 15 litres it falls under Building Regulations Part G and must be fitted by a G3 qualified installer. Being unvented and mains fed it gives proper flow at the tap, and the 2kW element brings it back up to temperature quickly between uses.
It comes ready to fit: pre-wired cable with a fitted plug, dielectric connectors and a wall bracket, with 1/2in BSP connections. Follow Redring's fitting instructions on cold water control for your supply.
